In the schedule of a working dad, the opportunities for mucking around with your own bike are always few and far between. The new bottom bracket and chainset have been with me for weeks now, but circumstances and the freezing cold weather have meant that I have not fitted them.
Octalinks are Shimano's evolution of the square tapered bracket. Instead of a square taper for the crank arm, the crank arm is splined partly to give better purchase and transmission of the crank arm on to the bottom bracket. Partly to have a patented pattern that other manufacturers couldn't copy and so lock users into one make of component. It's an evolution that works as looking through the parts list it was getting harder and harder to find one that wasn't Octalink or ISIS based. Which in itself is silly becuase the square taper is effectively bomb proof and easier to manufacture. But I guess in a modern world looking for lightness and the next best thing everyone is happy to be tied into one manufacturer.
So the bottom bracket was an easy fit after some further cleaning and degreasing to make sure the threads were free of dirt. The it was just a case of grease, grease and more grease to the threads and slot on the splines. One thing though: more work. I have gone for a bigger number of teeth so I need to replace the chain (which is now too short), and the front mech will need re-aligning, and a new cable to cope with any additional pull as I have not left much play in the current one. I may also need to sort out the chainline which may differ, but I will check that later.
The chain has been replaced with a SRAM 9 speed, because after mucking around with all those pins on the Shimano I can't be bothered spending another £5 because the pins won't insert straight and break. The powerlink clip makes it much easier to work with and has the advantage of if I change any of the gear ratios I will be able to shorten quickly and easily without fuss.